Intelligence
Explorer.

A flaw was found in SSSD. When configured with the LDAP access provider and `ldap_access_order` including `ppolicy` or `lockout`, a fail-open condition in the LDAP ppolicy access check can occur if a user lookup returns zero results. This can incorrectly return success and cache an allow decision, permitting continued authorization for a deleted or deprovisioned user. A remote attacker with prior valid account context could exploit this to maintain access to information and potentially make limited modifications to resources that should no longer be available.

Traefik is an open source HTTP reverse proxy and load balancer. From 3.6.11 until 3.7.13, checkPassword in pkg/middlewares/auth/basic_auth.go constructs the BasicAuth singleflight key from the submitted password and stored secret. Concurrent requests for absent usernames therefore coalesce on one key while configured usernames perform separate password hashes, creating an unauthenticated timing discrepancy that reveals whether a username exists. Sequential checks remain cost-equalized, Traefik v2 and Digest authentication are not affected, and the issue does not disclose credentials or bypass authentication. This issue is fixed in version 3.7.13.

A time-of-check to time-of-use (TOCTOU) race condition in the dynamic loader (ld.so) of the GNU C Library (glibc) versions 2.14 through 2.44 allows a local attacker to escalate privileges. When expanding $ORIGIN in DT_RPATH for setuid/setgid (AT_SECURE) programs, glibc validates the lexically normalized search path against the trusted directories but then opens the raw, un-normalized path. On systems where the Linux fs.protected_hardlinks sysctl is disabled, a local attacker who hard-links such a program into an attacker-controlled directory and wins a race to replace an intermediate path component with a symbolic link can direct the loader outside the trusted directory, causing it to load an attacker-controlled shared object and execute arbitrary code with the elevated privileges of the program. Exploitation requires an installed setuid or setgid binary whose DT_RPATH uses $ORIGIN followed by ".." traversal that normalizes into a trusted directory, and the ability to hard-link that binary and win the race by swapping a path component for a symbolic link. Major Linux-based OS distributions ship with fs.protected_hardlinks enabled by default and mitigate the vulnerability.

Insufficient Session Expiration vulnerability in OAuth token issuance in hexpm hexpm allows a user whose organization membership or session has ended to keep reading the organization's private packages and their documentation tarballs via a retained refresh token. generate_refresh_token/4 in lib/hexpm/oauth/jwt.ex signs the refresh token with the same iss, aud and scope claims as the access token, so it carries the same repository:<org> scopes. The CDN service that serves private repositories verifies the signature and time claims and then authorizes from the scope claim, with no database lookup and no way to tell the two token kinds apart. Removing a member or revoking a session therefore takes effect at the CDN only when the 30 day refresh token expires, instead of after the 30 minute access token lifetime. Access is read-only and limited to organizations the account belonged to when the token was granted. This issue affects hex.pm: from 2025-10-10 before 2026-09-22.

Twenty is an open-source CRM (customer relationship management) platform. Prior to 2.22.0, field-level read permission is enforced on selected output fields but not on GraphQL or REST filter predicates. A workspace member or API key with permission to read an object but not a particular field can reference that denied field in direct filters, relation filters, or persisted view filters. The resulting totalCount and row presence reveal whether guesses match the real column, forming a boolean/count oracle that can reconstruct denied field values for records exposed by the principal's row-level policy. This issue is fixed in version 2.22.0.

radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Windows 64-bit crash-dump dmp64 parser was vulnerable because the Windows dmp64 parser used an input-controlled physical-memory-run PageCount directly as the bound of a per-page allocation loop. The vulnerability is triggered by opening a small crafted full-memory Windows crash dump. The parser repeatedly allocated and appended page descriptors without validating the count against the dump size. This can cause denial of service through excessive memory consumption and processing time. This issue is fixed in version 6.2.0.

radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's NE relocation fixup-chain parser was vulnerable because the NE relocation parser followed fixup chains without an active iteration limit or cycle detection. The vulnerability is triggered by opening a crafted NE executable whose in-bounds relocation entry points back to itself instead of reaching 0xffff. The parser repeatedly processed the same relocation and allocated another relocation object on each iteration. This can cause denial of service through continuous CPU and memory consumption. This issue is fixed in version 6.2.0.

radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Mach-O LC_DATA_IN_CODE parser was vulnerable because the Mach-O LC_DATA_IN_CODE parser trusted dataoff and datasize and allowed a final partial record to be processed. The vulnerability is triggered by opening a crafted Mach-O file while the non-default bin.verbose option is enabled. When datasize was not a multiple of data_in_code_entry, the last iteration read beyond the allocated buffer. This can cause a heap out-of-bounds read and possible process termination; no attacker-observable memory disclosure has been demonstrated. This issue is fixed in version 6.2.0.

radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Lua 5.3 bytecode function parser was vulnerable because the Lua 5.3 bytecode function parser read fixed function-metadata fields immediately after a function-name string without checking the remaining buffer length. The vulnerability is triggered by opening or inspecting a crafted Lua 5.3 bytecode file whose function-name string ends at the input-buffer boundary. The parser read two integers and three one-byte fields beyond the allocated input buffer. This can cause invalid parser results or process termination; no attacker-observable memory disclosure has been demonstrated. This issue is fixed in version 6.2.0.

radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's binary property-list Unicode parser was vulnerable because the binary-property-list Unicode parser underallocated an uninitialized UTF-8 destination and did not guarantee NUL termination. The vulnerability is triggered by running the explicit pFB or pFBj commands on untrusted binary property-list data. The json encoder treated the converted data as a nul-terminated c string and could continue reading beyond the allocation. This can cause disclosure of uninitialized or adjacent heap contents in JSON output and possible process termination. This issue is fixed in version 6.2.0.

radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Mach-O Swift field-metadata parser was vulnerable because a relative Swift field pointer could be lower than the field-metadata section base, making subtraction produce a negative logical index. The vulnerability is triggered by parsing Swift type and class metadata from a crafted Mach-O file. The derived index was used to read four bytes immediately before the allocated field-metadata buffer. This can cause incorrect metadata processing or process termination; no attacker-observable memory disclosure has been demonstrated. This issue is fixed in version 6.2.0.

radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Apple Preferred Executable Format loader was vulnerable because the PEF loader accepted relocSecCount values that were not bounded by the number of sections or complete relocation records in the input. The vulnerability is triggered by normal binary-format auto-detection of a small crafted Apple PEF file. The loader could perform up to 268,435,456 relocation-section iterations and repeated buffer operations after record offsets passed the end of the file. This can cause denial of service through excessive CPU consumption and prolonged processing. This issue is fixed in version 6.2.0.

radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's ELF PN_XNUM handling was vulnerable because the ELF parser allocated the program-header array using the resolved PN_XNUM count but several consumers still iterated with the original e_phnum value of 65535. The vulnerability is triggered by processing a crafted ELF file with e_phnum = 0xffff and a much smaller resolved count in shdr[0].sh_info. Consumers iterated beyond the allocated program-header array. This can cause a heap out-of-bounds read and process termination, resulting in denial of service; memory disclosure and code execution have not been demonstrated. This issue is fixed in version 6.2.0.

radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's CPython bytecode .pyc marshal parser was vulnerable because the CPython marshal readers accepted a 32-bit string length without rejecting values that overflow the size-plus-one allocation. The vulnerability is triggered by opening or inspecting a crafted .pyc file through r2 or rabin2. A length of 0xffffffff wrapped the allocation to zero before the common byte reader wrote attacker-controlled data and fill bytes beyond the heap allocation. This can cause heap memory corruption and denial of service; arbitrary code execution is possible but has not been demonstrated. This issue is fixed in version 6.2.0.

Lantronix SLC8000 before firmware v9.7.0.5, SLC9000 before firmware v9.7.0.2, EMG8500/EMG7500 before firmware v9.7.0.1, and all firmware versions of SLB882/SLCx-03/SLCx-02 contain a path traversal vulnerability in the web management portal upload endpoint that allows authenticated attackers to write arbitrary data to any location on the device's filesystem, leading to remote code execution. The upload filename validation strips backslash characters but does not subsequently check for forward slashes when a backslash is detected; by supplying a filename containing both characters an attacker writes outside the intended upload directory to any writable path. Attackers can use this vulnerability to achieve complete loss of confidentiality, integrity, and availability on the affected device and potentially impact downstream serial-connected devices.

Lantronix SLC8000 before firmware v9.7.0.5, SLC9000 before firmware v9.7.0.2, EMG8500/EMG7500 before firmware v9.7.0.1, and all firmware versions of SLB882/SLCx-03/SLCx-02 contain an authentication bypass vulnerability in the web management portal upload endpoint that allows unauthenticated attackers to read sensitive configuration files and upload files to arbitrary filesystem locations, leading to remote code execution. The web configuration server constructs the session cookie file path using snprintf with a fixed-size buffer; by supplying a cookie value of a specific length an attacker causes the path to truncate at the required delimiter and leverages path traversal to redirect authentication validation to an arbitrary on-disk file such as the local user database, bypassing all session checks. Attackers can use this vulnerability to achieve complete loss of confidentiality, integrity, and availability on the affected device and potentially impact downstream serial-connected devices.

All firmware versions of Lantronix SLC8000, SLC9000, EMG8500, EMG7500, SLB882, SLCx-03, and SLCx-02 contain an authentication bypass vulnerability in the web management portal that allows unauthenticated attackers to derive valid session tokens of logged-in users and bypass source IP and User-Agent validation. Session tokens are generated deterministically from the device model and the current time at one-second resolution, resulting in a small enumerable set of possible active tokens. Attackers can construct a crafted URI that exploits file extension handling in the web server path routing to bypass per-session source-address validation, then use a derived token from a different source address to gain elevated privileges on the affected device and potentially impact downstream serial-attached devices.

Lantronix SLC8000 before firmware v9.7.0.3, SLC9000 before firmware v9.7.0.2, EMG8500/EMG7500 before firmware v9.7.0.1, and all firmware versions of SLB882/SLCx-03/SLCx-02 contain a command injection vulnerability that allows authenticated attackers with the services permission to execute arbitrary shell commands as root by exploiting the set script schedule command that passes unsanitized user input to a system() call. Attackers with the services permission can authenticate to the terminal or CLI interface and inject malicious commands through the unsanitized parameter to achieve complete loss of confidentiality, integrity, and availability on the affected device and potentially impact downstream serial-attached devices.

Lantronix SLC8000 before firmware v9.7.0.3, SLC9000 before firmware v9.7.0.2, EMG8500/EMG7500 before firmware v9.7.0.1, and all firmware versions of SLB882/SLCx-03/SLCx-02 contain a command injection vulnerability that allows authenticated attackers with the services permission to execute arbitrary shell commands as root by exploiting the set nfs download command that passes unsanitized user input to a system() call. Attackers with the services permission can authenticate to the terminal or CLI interface and inject malicious commands through the unsanitized parameter to achieve complete loss of confidentiality, integrity, and availability on the affected device and potentially impact downstream serial-attached devices.

Lantronix SLC8000 before firmware v9.7.0.3, SLC9000 before firmware v9.7.0.2, EMG8500/EMG7500 before firmware v9.7.0.1, and all firmware versions of SLB882 contain a server-side request forgery vulnerability in the WebSSH/WebTelnet listener that allows unauthenticated attackers to cause the affected device to establish Telnet connections to attacker-controlled endpoints. The custom shellinaboxd uses the rooturl parameter from the web connection to determine its own IP address; by modifying this parameter an attacker redirects the Telnet terminal connection to an arbitrary host or IP. Attackers can use this capability to enumerate or communicate with internal network endpoints that would otherwise be inaccessible.

Lantronix SLC8000 before firmware v9.7.0.3, SLC9000 before firmware v9.7.0.2, EMG8500/EMG7500 before firmware v9.7.0.1, and all firmware versions of SLB882 contain a server-side request forgery vulnerability in the WebSSH/WebTelnet listener that allows unauthenticated attackers to cause the affected device to establish SSH connections to attacker-controlled endpoints. The custom shellinaboxd uses the rooturl parameter from the web connection to determine its own IP address; by modifying this parameter an attacker redirects the SSH terminal connection to an arbitrary host or IP. Attackers can use this capability to enumerate or communicate with internal network endpoints that would otherwise be inaccessible.

Lantronix SLC8000 before firmware v9.7.0.3, SLC9000 before firmware v9.7.0.2, EMG8500/EMG7500 before firmware v9.7.0.1, and all firmware versions of SLB882 contain a server-side request forgery vulnerability in the WebSSH/WebTelnet listener that allows unauthenticated attackers to cause the affected device to establish SSH connections to attacker-controlled endpoints. The custom shellinaboxd builds its SSH connection target using a snprintf call with user-supplied input; by supplying an overlong username string an attacker causes the device IP suffix to be truncated, redirecting the resulting connection to an arbitrary host. Attackers can use this capability to enumerate or communicate with internal network endpoints that would otherwise be inaccessible.

Lantronix SLC8000/SLC9000 before firmware v9.7.0.2, EMG8500/EMG7500 before firmware v9.7.0.1, and all firmware versions of SLB882/SLCx-03/SLCx-02 contain a stack-based buffer overflow vulnerability that allows authenticated attackers to potentially execute arbitrary code by exploiting an undocumented mfc eeprom write command that copies unbounded user input into a bounded stack buffer before passing it to a system() call. Attackers can authenticate as any user to the terminal or CLI interface and supply an oversized input to trigger the overflow, potentially achieving complete loss of confidentiality, integrity, and availability on the affected device and impacting downstream serial-attached devices.

Lantronix SLC8000/SLC9000 before firmware v9.7.0.2, EMG8500/EMG7500 before firmware v9.7.0.1, and all firmware versions of SLB882/SLCx-03/SLCx-02 contain a stack-based buffer overflow vulnerability that allows authenticated attackers to potentially execute arbitrary code by exploiting an undocumented mfc eeprom read command that copies unbounded user input into a bounded stack buffer before passing it to a system() call. Attackers can authenticate as any user to the terminal or CLI interface and supply an oversized input to trigger the overflow, potentially achieving complete loss of confidentiality, integrity, and availability on the affected device and impacting downstream serial-attached devices.