Intelligence
Explorer.

Warpgate is an open source SSH, HTTPS and MySQL bastion host for Linux. Prior to 0.27.6, the response_mode=form_post SSO return path in warpgate-protocol-http/src/api/sso_provider_list.rs uses serde_json::to_string inside ReturnToSsoPostResponse without neutralizing a script-closing sequence. The vulnerable value can enter the script block through the attacker-controlled next redirect parameter stored by warpgate-protocol-http/src/api/sso_provider_detail.rs or through IdP-derived error messages that make_redirect_url concatenates without URL encoding. The IdP-derived path is reachable when the attacker controls a configured identity provider, or when the attacker controls the email or username claim on an attacker-controlled account and the configured identity provider permits the required unvalidated claim format. A victim must complete the form_post SSO flow for the injected markup to be rendered. The Warpgate Content-Security-Policy blocks injected JavaScript and event handlers, so the demonstrated impact is content spoofing, a false login form, or a meta refresh rather than script execution. This issue is fixed in version 0.27.6.

Warpgate is an open source SSH, HTTPS and MySQL bastion host for Linux. From 0.23.0 until 0.27.3, HTTP API token authentication resolves ConfigProvider::validate_api_token into RequestAuthorization::UserToken without enforcing the owning user's allowed_ip_ranges against the trusted client address in warpgate-protocol-http/src/common.rs. An attacker holding a leaked, phished, or exfiltrated X-Warpgate-Token can therefore use it from a prohibited network location. Deployments without allowed_ip_ranges are unaffected, and HTTP target proxying plus SSH, MySQL, PostgreSQL, RDP, VNC, and Kubernetes paths do not accept this vulnerable HTTP token flow. This issue is fixed in version 0.27.3.

Dell Command | Integration Suite for System Center, versions prior to 6.7.2, contain an Incorrect Default Permissions vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information Disclosure.

Dell Command | Intel vPro Out of Band, versions prior to 4.7.2, contain an Incorrect Default Permissions vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information Disclosure.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Warpgate is an open source SSH, HTTPS and MySQL bastion host for Linux. Prior to 0.25.6, api_get_recording_stream in warpgate-admin/src/api/recordings_detail.rs protects /@warpgate/admin/api/recordings/{uuid}/stream only with session authentication and omits require_admin_permission for AdminPermission::RecordingsView. Any authenticated regular user who identifies an active recording can subscribe to its WebSocket and receive real-time terminal input and output from proxied SSH, MySQL, or PostgreSQL sessions, including credentials, commands, and other sensitive data belonging to users and administrators. This issue is fixed in version 0.25.6.

Warpgate is an open source SSH, HTTPS and MySQL bastion host for Linux. Prior to 0.25.6, copy_server_request in warpgate-protocol-http/src/proxy.rs forwards a client-supplied x-warpgate-username header before inject_own_headers appends the authenticated username. Because the request builder preserves repeated values, a proxied backend that trusts the first x-warpgate-username value can authorize an authenticated attacker as another user. The same forwarding policy also accepts the reserved x-warpgate-authentication-type header, and warpgate-common/src/http_headers.rs does not exclude either reserved identity header. This issue is fixed in version 0.25.6.

InvenTree is an Open Source Inventory Management System. Prior to 1.4.0, privileged staff users who can author report or label templates can cause WeasyPrint report rendering to retrieve attacker-selected resources through the HTTP and HTTPS URL schemes or the local file URI scheme. The HTML(string=html).write_pdf() path does not provide a restricted url_fetcher, and attach_to_model=True stores the original generated PDF before later processing, allowing fetched local files or internal HTTP response bodies to be recovered from embedded attachments. This enables full-read server-side request forgery, arbitrary local file disclosure including application credentials, and possible compromise of a superuser account. This issue is fixed in version 1.4.0.

InvenTree is an Open Source Inventory Management System. Prior to 1.4.0, ReportPrint at POST /api/report/print/ and LabelPrint at POST /api/report/label/print/ require authentication but do not call users.permissions.check_user_permission for the caller's per-model view role before selecting objects by primary key and rendering them with a chosen template. Because default templates exist for major business models and DataOutput stores the generated artifact for the requesting user, a role-less or unrelated-role account can enumerate object identifiers and download reports containing purchase, sales, part, bill-of-materials, stock, build, supplier, customer, pricing, and inventory data that the corresponding detail APIs would deny. This issue is fixed in version 1.4.0.

InvenTree is an Open Source Inventory Management System. Prior to 1.4.0, the /api/importer/row/ and /api/importer/mapping/ endpoints do not scope DataImportRow and DataImportColumnMap querysets to the owner of the associated DataImportSession. Any authenticated user, including an account with no assigned roles, can supply another user's import session identifier and retrieve that session's row_data and data fields together with its column mappings. This exposes the full contents of data staged for import across users, although the InvenTree threat model treats authenticated instance users as trusted. This issue is fixed in version 1.4.0.

InvenTree is an Open Source Inventory Management System. Prior to 1.4.0, PluginSettingList, PluginAllSettingList, and PluginSettingDetail set GlobalSettingsPermissions without the IsAuthenticated permission used by the project default and equivalent global-settings endpoints. GlobalSettingsPermissions returns true for safe methods, while AuthRequiredMiddleware exempts /api/ paths, so an unauthenticated caller can retrieve plugin names, setting keys, descriptions, types, choices, and non-protected configuration values through /api/plugin/settings/ and the per-plugin settings endpoints. Protected secret values remain masked as three asterisks, limiting the issue to metadata and non-secret configuration disclosure. This issue is fixed in version 1.4.0.

InvenTree is an Open Source Inventory Management System. Prior to 1.4.0, POST /api/barcode/ accepts an attacker-synthesized internal JSON barcode containing a lowercase model label and integer primary key, while BarcodeView uses IsAuthenticatedOrReadScope and requires only authentication or a general read scope. The built-in barcode plugin selects the object with model.objects.get(pk=...), and InvenTreeBarcodeMixin.format_matched_response() returns the complete model serializer output as instance without checking the caller's per-model view role. A low-privilege user can enumerate primary keys for parts, stock, locations, supplier and manufacturer parts, orders, and builds to disclose commercially sensitive inventory, pricing, supplier, customer, and order data. This issue is fixed in version 1.4.0.

Warpgate is an open source SSH, HTTPS and MySQL bastion host for Linux. Prior to 0.25.5, the /@warpgate/api/sso/providers/:name/start endpoint stores an attacker-controlled next parameter that the POST /@warpgate/api/sso/return handler inserts without HTML escaping into the response generated by warpgate-protocol-http/src/api/sso_provider_list.rs. A victim who follows a crafted link and completes SSO can cause markup and JavaScript to execute in the authenticated Warpgate origin, allowing access to session data and actions through user APIs, and through administrator APIs only when the victim is an administrator. The GET /@warpgate/api/sso/return path also uses the same unvalidated value as a redirect destination, enabling an open redirect. This issue is fixed in version 0.25.5.

Dell Command Powershell Provider (DCPP), versions prior to 2.10.2 contain an Insertion of Sensitive Information into Log File vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information Disclosure.

The Time-aware GPIO syscall verification handler z_vrfy_tgpio_pin_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_handlers.c validated only the port device object and passed the caller-supplied timestamp and event_count output pointers to the driver without a K_SYSCALL_MEMORY_WRITE() check. The other handlers in the same file (z_vrfy_tgpio_port_get_time(), z_vrfy_tgpio_port_get_cycles_per_second()) already performed that check, so the omission left one syscall unguarded. tgpio_pin_read_ts_ec() is declared __syscall, so with CONFIG_USERSPACE=y an unprivileged user-mode thread that has been granted access to the TGPIO device object can invoke it with arbitrary pointer values. tgpio_intel_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_intel.c bounds-checks only the pin index and then unconditionally performs timestamp = ... and event_count = ..., executing two 8-byte stores in supervisor mode at addresses chosen by the user-mode caller. The result is a write-what-where primitive that crosses the userspace/kernel boundary: the target address is fully attacker-chosen and the stored values are the hardware time-capture and event-counter register contents. Corrupting kernel data structures this way can escalate the calling thread to supervisor privilege or crash the system; the device-object permission required is a narrow capability that is not intended to confer any kernel-memory access. The fix adds the two missing K_SYSCALL_MEMORY_WRITE() validations before the driver call. Exposure is narrow in practice. Only builds with CONFIG_USERSPACE=y and CONFIG_TIMEAWARE_GPIO=y compile the affected file, and from v3.6.0 onward the file additionally referenced a relocated header (<zephyr/syscall_handler.h>) and removed Z_SYSCALL_* macros, so such a configuration failed to build until those were repaired after v4.4.0. Downstream trees that locally corrected that breakage, and v3.5.0 builds where it did not exist, are the exposed population.

Telegram Desktop before 6.9.4 allows XSS in the HTML exporter. (The first fixed stable version is 7.0.1.) This occurs in button.text.toUtf8 in export_output_html.cpp. Exploitation cannot occur unless HTML export was used by a victim. However, the exploit payload can be exported if a message were forwarded into a group by a member (it is not necessary for the message author to be a member of a group).

Email::Sender::Transport::Sendmail versions before 2.602 for Perl allow arbitrary command execution on Windows sending a message whose envelope address reaches the shell in _sendmail_pipe. On MSWin32 the envelope sender and every recipient go into a single command string, which open() passes to a shell. Every other platform gets the list form, which runs sendmail directly. When the caller supplies no envelope, Email::Sender::Simple takes the recipients from the To and Cc headers and the sender from the From header. An attacker who controls one of those header addresses runs commands as the sending process.

An out-of-bounds write flaw was found in usbredir. Starting an isochronous OUT stream with a transfer count of 1 leaves the stream's single transfer buffer permanently unsubmitted, defeating the bounds check in usbredirhost_iso_packet() and allowing a usbredir peer to write past the end of the packet descriptor array on every subsequent isochronous packet.

Graylog is a free and open log management platform. From 6.3.0 until 6.3.14, 7.0.9, and 7.1.4, the view update API for saved searches and dashboards permits a user with edit permission but without entity ownership to include a shareRequest that grants owner permissions to an arbitrary account. The selected account can then delete the saved search or dashboard or remove the original owner's access. Graylog Cloud was patched before the advisory was published. This issue is fixed in versions 6.3.14, 7.0.9, and 7.1.4.

KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. From 1.16.0 until 1.21.2, 1.22.2, and 1.23.1, the DecompressTarGz function in keadm/cmd/keadm/app/cmd/util/common.go joins archive entry names to the extraction destination without sufficient validation. During keadm join or installation on Windows edge nodes, an archive influenced through a compromised, replaced, or untrusted download source can contain parent-directory components, Windows-style backslashes, absolute paths, or drive-prefixed paths that escape the intended directory. The affected keadm process can consequently write or overwrite files with its own privileges, potentially modifying configuration, executable, or service files and enabling persistent system modification or code execution. This issue is fixed in versions 1.21.2, 1.22.2, and 1.23.1.

KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. From 1.21.0 until 1.21.2, 1.22.2, and 1.23.1, ConfigUpdateJob processing in edge/pkg/taskmanager/actions/configupdatejob.go concatenates authenticated user-controlled updateFields values into the keadm config-update command and executes it through a system shell. A user with permission to create or modify ConfigUpdateJob resources can include shell metacharacters in the complete --set value and cause arbitrary commands to execute on an enrolled target edge node with the privileges of the KubeEdge process handling the job. This issue is fixed in versions 1.21.2, 1.22.2, and 1.23.1.

InvenTree is an Open Source Inventory Management System. Prior to 1.4.0, the POST /api/machine/{pk}/restart/ endpoint in src/backend/InvenTree/machine/api.py uses IsAuthenticatedOrReadScope without requiring the ADMIN role used by other machine management operations. Any authenticated user who lacks the ADMIN role, including a warehouse user with only the STOCK role, can cause MachineRestart to invoke registry.restart_machine() for any registered machine, resetting its status and interrupting active printing, scanning, or other machine operations. This issue is fixed in version 1.4.0.

CKAN MCP Server is a tool for querying CKAN open data portals. Prior to version 0.4.108, the SSRF guard `validateServerUrl` (added for CVE-2026-33060, extended for CVE-2026-53509) validates only the hostname string and never resolves DNS. Any caller-supplied `server_url` whose hostname *resolves* to an internal address passes the guard, so the server issues requests to loopback and cloud metadata (`169.254.169.254`). This is a third bypass of the same guard, and it reaches IMDS — strictly more than CVE-2026-53509, which only reached loopback. Version 0.4.108 contains an updated fix.

HomeBox is a home inventory and organization system. Prior to 0.26.0, the default-on BlockBogonNets and BlockCloudMetadata notifier SSRF protections in backend/internal/sys/validate/notifier_url.go do not inspect IPv4 destinations embedded in the NAT64 prefixes 64:ff9b::/96 and 64:ff9b:1::/48. An authenticated user can submit a generic:// notifier through POST /v1/notifiers or POST /v1/notifiers/test, and on a Homebox instance that egresses through NAT64/DNS64, the gateway can translate an accepted IPv6 destination to cloud metadata, localhost, or another internal IPv4 host. The notifier test path returns delivery result information, and Shoutrrr propagates the response, providing feedback that can disclose retrieved metadata such as temporary credentials. Without NAT64 egress, the crafted IPv6 destination is not routable, but the guard still incorrectly classifies it as safe. This issue is fixed in version 0.26.0.