Intelligence
Explorer.

Use After Free in the drag source path of the drag and drop protocol in kitty from 0.47.0 before 0.49.0 allows a program writing to the terminal to cause the terminal to read from and write to freed heap memory, because drag_remote_file_data() in kitty/dnd.c holds a DragRemoteItem pointer into an array it does not own, calls toplevel_data_for_drag() or subdir_data_for_drag(), and then continues to use that pointer. Those helpers, and add_payload() and populate_dir_entries() which they call, report errors through the abrt() macro, which expands to cancel_drag() followed by a plain return, and cancel_drag() calls drag_free_offer(), which frees the array the pointer refers to. The helpers return void, so the caller receives no indication that the teardown happened, and proceeds to call all_children_complete() on the freed pointer, which dereferences it, and then to write through it. That dereference is guarded by a local flag that is set when the request carries no payload and announces no further data, which is the same condition that selects the finalisation block of add_payload(), so the error paths in that block reach it: a create that fails because an entry of the same name already exists, because the client may declare two entries with one name and the create operations use O_CREAT with O_EXCL and symlinkat(), a mkdirat() failure other than EEXIST, and the directory entry allocation paths. Both branches reach it. In the top level branch the caller's pointer is never cleared, so clearing the owning structure's own pointers during teardown does not help. In the sub directory branch subdir_data_for_drag() sets the caller's pointer to NULL on entry and assigns it only after its own last error path, so its own aborts leave the caller with NULL and are stopped by a null check, but it then calls add_payload() with that pointer set, and an abort there leaves the caller holding a freed child node inside the item tree, which drag_free_offer() frees by recursion. This results in undefined behaviour in the terminal process, reachable from the byte stream of any program running in the window.

A malicious txtar could escape the intended execution context and force arbitrary writes to the playground host's trusted filesystem. Disjointly, one of the three possible paths to invoke go vet on the playground host did not correctly restrict the execution environment. This permitted a Go process to make a read for an environment configuration file rooted in the playground host's $HOME. Together, a well-crafted go env file and the go vet invocation could lead to remote code execution in the playground host itself. This does not affect users of go.dev/play directly; however, it may affect independent deployments of golang.org/x/playground.

Bludit CMS through 3.22.0 contains a missing authorization vulnerability that allows authenticated users holding the Author or Editor role to read the full content of private drafts and scheduled posts belonging to any other user, including administrators, by exploiting the content-get-list AJAX endpoint in bl-kernel/ajax/content-get-list.php. Attackers can send an authenticated GET request to the admin AJAX endpoint with the draft parameter set to true, triggering getList() without ownership constraints and returning serialized page objects site-wide, exposing pre-publication material and sensitive notes stored in administrator-owned drafts.

Bludit CMS through 3.22.0 contains a mass assignment vulnerability that allows authenticated users with the Author role to modify privileged page fields reserved for administrators by injecting reserved parameters into a content save request. Attackers can submit reserved fields such as type and username through the Pages::edit() function in bl-kernel/pages.class.php, which iterates all fields declared in dbFields without per-field authorization, enabling an Author to convert pages to static site-wide navigation entries or transfer page ownership to arbitrary accounts.

The @payloadcms/storage-vercel-blob storage adapter for Payload contains an improper access control vulnerability that allows authenticated users to bypass collection-level permissions by accessing the client-upload route directly. Attackers can upload files through the client-upload endpoint without possessing the required collection access permissions, circumventing the intended access control enforcement.

A flaw was found in NetworkManager-iodine, the iodine VPN plugin for NetworkManager. A local unprivileged user can exploit a vulnerability in how the 'nameserver' setting is processed when establishing an iodine VPN connection. By embedding shell metacharacters (special characters that can execute commands) in the 'nameserver' value, an attacker can inject and execute arbitrary commands. These commands run with root privileges before the application drops its elevated permissions, leading to local privilege escalation.

BerriAI LiteLLM before 1.101.0-rc.1 contains a tenant isolation bypass vulnerability in the semantic cache layer that allows authenticated users to read other tenants' cached responses by exploiting a metadata key mismatch between _get_semantic_cache_tenant_scope() and _get_metadata_variable_name(). Attackers holding a valid virtual key can submit semantically similar prompts on affected routes such as /v1/responses and /bedrock/* to retrieve cached responses containing other tenants' personally identifiable information, financial data, or source code, and can cause agentic front-ends to auto-execute attacker-supplied tool calls under victim credentials by returning cached function_call or tool_calls payloads to a different principal.

Missing Authorization in the drop handling path of the drag and drop protocol in kitty from 0.47.0 before 0.49.0 allows a program writing to the terminal to obtain the contents of files dragged over the window even when the user never completes the drop, because drop_enqueue_request() in kitty/dnd.c serves a drag data request without first checking the drop state of the window, so a client that issues the request while a drag is merely hovering receives the data offered for the drag. In the same file, drop_left_child(), which runs when the drag leaves the window without a drop having occurred, releases the offered MIME list but retains the pending request state, the open file descriptor and its main loop transfer timer, the directory handles, the URI list and the pending MIME name, so a client can continue to read through a retained directory handle, and an in-flight file transfer continues to stream, when no drag is in progress. The file contents are read from the filesystem by the kitty process itself using the paths the drag source offered. This results in disclosure of the contents of files the user moved over the window without ever releasing them into it.

RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, RabbitMQ Management rendered an AMQP authorization-error reason containing an attacker-controlled queue name as HTML when the OAuth management UI was enabled. Exploitation requires an attacker with queue configure permission, a management administrator who can see but cannot read that queue, and the administrator clicking Get Message(s). A queue name containing a base element can then retarget the automatic relative refresh because the Content Security Policy omits base-uri and connect-src, and an attacker endpoint that permits the management origin through CORS can receive the victim's Authorization header. This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5.

RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, RabbitMQ OAuth credential refresh retains revoked runtime tags. when an existing AMQP connection refreshes from an OAuth token that grants the impersonator tag to a valid same-username token that no longer grants that tag, RabbitMQ updates the OAuth backend implementation (token/scopes/expiry) but leaves the connection's runtime #user.tags unchanged. rabbitaccesscontrol:checkuserid/2 then still honors the stale impersonator tag, so the connection (including newly opened channels) can continue publishing messages with a foreign AMQP userid after that privilege should have been revoked. A fresh connection using the downgraded token correctly refuses the same publish, proving the defect is stale session state rather than the token Limited to connections that once held impersonator and successfully refresh to a downgraded same-username rabbitauthbackendoauth2 (or an equivalent refresh-capable backend that returns tags) is enabled for This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5.

RabbitMQ is a messaging and streaming broker. Prior to 4.3.5, an authenticated user who can bind a queue to a topic exchange and publish to it can use consecutive # segments in a binding key to make both topic matchers revisit the same trie-node and routing-key-suffix states without memoization. The matcher materializes duplicate destinations before deduplication, causing combinatorial CPU work and memory pressure that can disrupt routing for all tenants. This vulnerability is fixed in 4.3.5.

RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, the Shovel parameter parser converted attacker-controlled runtime parameter values into non-garbage-collected Erlang atoms before bounding them or checking a fixed allowlist. Exploitation requires network access to the Management HTTP API, valid credentials with both the management and policymaker tags, permission to set Shovel runtime parameters on a vhost, and the rabbitmq_shovel and rabbitmq_shovel_management plugins to be enabled. The attacker can exhaust the node-wide atom table and deny service, and malicious parameters are stored durably and reparsed when workers start, so atom pressure can recur after restart without a live attacker connection. This issue is fixed in versions 4.2.9 and 4.3.3.

RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.23, 4.1.14, 4.2.9, and 4.3.3, the optional rabbitmq_jms_topic_exchange plugin's x-jms-topic exchange accepted a client-controlled rjms_erlang_selector binding expression whose LIKE evaluator expanded percent and underscore wildcards into overlapping PCRE fragments. It executed those fragments with raw re:run/3 without match or recursion limits, allowing an authenticated tenant that can bind and publish to consume broker scheduler CPU and deny service with pathological selectors. This issue is fixed in versions 4.0.23, 4.1.14, 4.2.9, and 4.3.3.

RabbitMQ is a messaging and streaming broker. From 3.13.0 until 4.3.3, 4.2.9 , 4.1.14, 4.0.24, and 3.13.18, Federation upstream in RabbitMQ skips vhost authorization allowing cross-vhost message access. what the bug lets you do. A policymaker on one vhost reads and drains messages out of another vhost it has no permission on. With the default ack-mode the source messages are consumed (deleted), not copied. Why that should not 1. Federation validates the upstream URI without any vhost-access Cross-vhost message read/drain from a per-vhost policymaker, breaking vhost tenancy This issue is fixed in versions 4.3.3, 4.2.9 , 4.1.14, 4.0.24, and 3.13.18.

RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.18, 4.0.23, 4.1.14, 4.2.9, and 4.3.3, native MQTT and MQTT over WebSocket behind a trusted PROXY Protocol frontend could lose the proxy-derived client address before the MQTT authentication path checked loopback_users, causing the frontend-to-broker address to be treated as loopback. An attacker who can reach the trusted frontend and has valid credentials for a loopback-restricted account can therefore bypass the source-address restriction; the issue does not bypass password authentication. This issue is fixed in versions 3.13.18, 4.0.23, 4.1.14, 4.2.9, and 4.3.3.

RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.3.3 and 4.2.9, OAuth2 Client Secret Exposed via Unauthenticated JavaScript Endpoint (CWE-200). when OAuth2 authentication is enabled for the RabbitMQ Management UI and the configured flow, IDP use a client secret, the oauthclientsecret configuration value is included in the JavaScript served by the unauthenticated endpoint /js/oidc-oauth/bootstrap.js. Any user who can reach the management UI port can retrieve the OAuth2 client secret without Files: deps/rabbitmqmanagement/src/rabbitmgmtwmauth.erl, line 186 deps/rabbitmqmanagement/src/rabbitmgmtoauthbootstrap.erl, lines 35-50 deps/rabbitmqmanagement/src/rabbitmgmtdispatcher.erl, lines 45-49 (route registration) Code Path: 1. The route /js/oidc-oauth/bootstrap.js is registered as a plain Cowboy handler (rabbitmgmtdispatcher.erl:46): Credential exposure for the affected configuration: OAuth2 client secret is accessible without any authentication Token theft: Attacker can complete the authorization code flow using stolen authorization codes Client impersonation: Attacker can make requests. Any RabbitMQ deployment with: This issue is fixed in versions 4.3.3 and 4.2.9.

RabbitMQ is a messaging and streaming broker. From 3.13.0 until 4.3.3, 4.2.9, 4.1.14, 4.0.23, and 3.13.18, JWKS Fetch Ignores HTTP Response Status Code - Signing Key Destruction Causes Authentication DoS (CWE-252). the JWKS key fetching mechanism in uaajwt.erl does not validate the HTTP response status code when downloading signing keys from the OAuth2 provider's JWKS endpoint. Non-200 responses (including 4xx and 5xx errors) are processed identically to successful responses. When the JWKS endpoint returns an error response with a valid-JSON body that lacks a keys field, all previously cached signing keys are destroyed, causing a persistent authentication denial of Files: deps/rabbitmqauthbackendoauth2/src/uaajwt.erl, lines 50-63 deps/rabbitmqauthbackendoauth2/src/uaajwks.erl, lines 5-7 deps/rabbitmqauthbackendoauth2/src/rabbitoauth2provider.erl, lines 98-107 Bug 1: HTTP status code ignored (uaajwt.erl:50-63): The Erlang httpc module returns {ok, {{HttpVersion, StatusCode, ReasonPhrase}, Headers, Body}}. The pattern {ok, {, , JwksBody}} matches ANY successful HTTP transaction Persistent authentication DoS: Once keys are destroyed, ALL OAuth2/JWT authentication fails for all users until a new successful JWKS refresh occurs Amplification: A single attacker can deny access to all legitimate OAuth2 users across the entire RabbitMQ. This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, 4.0.23, and 3.13.18.

RabbitMQ is a messaging and streaming broker. From 4.1.0 until 4.3.3, 4.2.9, and 4.1.11, Stream Management Super-Stream Binding Keys Allocation Allows Low-Privilege Node Denial of Service. rabbitMQ 4.3.1 with rabbitmqstreammanagement enabled accepts PUT /api/stream/super-streams/{vhost}/{name} requests from an authenticated management user that can access the target vhost. When the request body contains the binding-keys field, the handler parses the attacker-controlled comma-separated string and builds the full stream-name list before checking whether the user has permission to configure the resulting streams. A low-privileged management user with vhost access but no configure, write, or read permission can therefore force large transient allocations before the resource permission check. In a 768 MB memory-limited container, one HTTP PUT with about 4.5 MB of JSON body killed the RabbitMQ container with Docker state exited true An authenticated low-privileged management user can kill a memory-limited RabbitMQ node with one HTTP This issue is fixed in versions 4.3.3, 4.2.9, and 4.1.11.

RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3 and 4.2.9 and 4.1.14 and 4.0.23, Incomplete fix for CVE-2026-44838: escaperegexchar/1 does not escape -, leaving room for an MQTT topic permission bypass. the CVE-2026-44838 fix made expandtopicpermission/2 escape regex metacharacters in expanded topic-permission variables (escaperegex(V)), but escaperegexchar/1 escapes \ ^ $ . | ? + ( ) [ ] { } and omits -. When a topic permission template places {clientid} inside a [...] character class A low-privileged authenticated MQTT user controlling its clientid can broaden topic authorization (read and write) when templates embed {clientid} in a [...] This issue is fixed in versions 4.3.3 and 4.2.9 and 4.1.14 and 4.0.23.

RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3, 4.2.9, 4.1.14, and 4.0.23, Shovel does not format state logged by the crash reporter and can leave unencrypted credentials in a crash dump file. the shovel worker genserver processes does not implement the formatstatus/2 callback. When these processes crash (e.g., due to network partitions, connection failures), the OTP SASL error handler writes the full process state , including plaintext AMQP passwords and URIs , to the error log. This is particularly severe for the shovel worker, which stores deobfuscated plaintext URIs (including amqp://user:password@host format) in its genserver state for the entire process Automatic Credential Exposure: Shovel worker crashes (common during network partitions) automatically write plaintext upstream/downstream passwords to error logs No Special Configuration Needed: Unlike DEBUG logging, SASL error reports are always active Broad. This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, and 4.0.23.

RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, OAuth2 isinteger(Exp) guard skips token-expiry checks for float exp. validatetokenexpiry/1 (lines 208-214) and expirytimestamp/1 (138-144) both guard with 'when isinteger(Exp)' and fall through to ok/never for float values. josejwt:verify validates only the signature, not exp. With float exp, no expiry validation occurs anywhere in the If the IdP emits exp as a JSON float (RFC 7519 permits fractional NumericDate), both the login-time expiry check and the mid-connection disconnect timer are silently skipped , an already-expired token is accepted, and connections never time OAuth2 backend enabled IdP emits float exp (uncommon; mainstream IdPs emit integers) Attacker possesses a previously-valid signed. This issue is fixed in versions 4.2.9 and 4.3.3.

RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, AMQP 1.0 management exchange.declare skips alternate-exchange permission check. pUT /exchanges/:name (lines 192-240) checks only configure on the declared exchange and passes XArgs straight to rabbitexchange:declare/7. It omits the checkreadpermitted(X) + checkwritepermitted(AE) that rabbitchannel.erl:2540-2548 enforces for the alternate-exchange argument on the AMQP 0-9-1 path. The same file already implements the analogous DLX check for queues (lines 708-719), confirming this is a missing-check bug rather than intentional A user with only configure on exchange X can route X's unroutable messages into an alternate exchange they have no write permission AMQP 1.0 enabled (default in RabbitMQ 4.x) Attacker has configure on at least one exchange but lacks write on the target. This issue is fixed in versions 4.2.9 and 4.3.3.

RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.18 and 4.0.23 and 4.1.14 and 4.2.9 and 4.3.3, Stored XSS via TLS peer-certificate DN in stream-management UI (sibling of V-11). lines 102/106/110 render peercertsubject / peercertissuer with raw <%= %> and no fmtstring(). RFC4514 backslash-escaping of </> is HTML-inert and bypassable (<img ... //>). Requires non-default config: a stream TLS listener with verifypeer and an attacker-obtainable trusted cert with a malicious Same as the connection.ejs finding, against operators viewing the stream-connection detail rabbitmqstream + rabbitmqstreammanagement enabled with a TLS listener using verifypeer Attacker can obtain a certificate signed by a CA the listener trusts, with attacker-chosen DN An operator views the. This issue is fixed in versions 3.13.18 and 4.0.23 and 4.1.14 and 4.2.9 and 4.3.3.

RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.8 and 4.3.2, set_token_auth/2 inserted a bearer token from the Authorization header or access_token cookie into OAuth bootstrap JavaScript without escaping, allowing attacker-controlled token content to execute JavaScript in the management UI origin. The endpoint is exposed before authentication only when management.oauth_enabled is true, and exploitation through the cookie path additionally requires the attacker to plant an access_token cookie on the management host. This issue is fixed in versions 4.2.8 and 4.3.2.