Intelligence
Explorer.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: rate limit unmapped SID errors A client can include many structurally valid but unmapped SIDs in a DACL. Logging every mapping failure lets one request generate hundreds of kernel error messages. Rate limit the message to prevent an authenticated client from flooding the kernel log.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix listener task lifetime on netdev events The listener thread exits when its listening socket is shutdown. The netdevice notifier shuts down the socket before calling kthread_stop(), so the task_struct can be freed before kthread_stop() gets its reference. Create the listener in a stopped state and hold an extra task_struct reference until kthread_stop_put() completes. Also stop and release listeners before freeing their interface records during TCP teardown.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: validate version TLV value lengths btintel_parse_version_tlv() verifies that a complete TLV is present in the response, but it does not ensure that the value is long enough for the specific TLV type. A short value can therefore cause an out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(), or memcpy(). Reject values shorter than the minimum required by each known TLV type. Also reject responses that do not contain the Command Complete Status field.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: bound firmware ID by TLV length The firmware ID is treated as a NUL-terminated string even though the TLV length is its only boundary. If the value does not contain a NUL terminator, snprintf() can read beyond the received response. Limit the conversion to the advertised TLV value length.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix race condition during device registration In hci_register_dev(), the power_on work item is queued to hdev->req_workqueue before initializing hdev->adv_monitors_idr and registering the MSFT extension via msft_register(). For devices marked with quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on the device. When the power_on work item runs concurrently on another CPU, hci_power_on() detects that the device is unconfigured and immediately invokes hci_dev_do_close(), which calls msft_do_close(). Concurrently, msft_register() allocates the msft structure and exposes it to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If msft_do_close() executes while hdev->msft_data is already assigned but the mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates on an uninitialized mutex, triggering a DEBUG_LOCKS warning: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common kernel/locking/mutex.c:625 [inline] WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550 kernel/locking/mutex.c:821 ... Call Trace: <TASK> msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693 hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522 hci_dev_do_close net/bluetooth/hci_core.c:499 [inline] hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0x92d/0xe10 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Fix this by moving the queue_work() call in hci_register_dev() to after idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device structures and extensions are fully initialized before asynchronous tasks can access them. Additionally, assign hdev->msft_data in msft_register() only after mutex_init(&msft->filter_lock) has completed.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan l2cap_new_connection() sets default value of channel mode to match the parent channel. l2cap_le_connect_req() left this at the default, and created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that mode. This causes FLAG_DEFER_SETUP channels to reply to L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect. It can also result to stack OOB write (of l2cap_alloc_cid determined values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not limit maximum number of deferred channels or check for duplicate ident. Fix by setting chan->mode correctly in l2cap_le_connect_req(). Also check channel mode in l2cap_ecred_rsp_defer(), and do WARN_ON_ONCE instead of OOB write to make it less brittle.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect l2cap_chan_connect() tries to ensure there are no more than L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs. However, the check only counts deferred channels. If 6 L2CAP sockets are connected at the same time in order DDDDND (D=deferred, N=non-deferred), the last can bump the total to max+1. It results to one __le16 written out of bounds of the scid array, and an invalid ECRED_CONN_REQ being sent. Fix by leaving room for the non-deferred pending ECRED channels in the counting in l2cap_chan_connect(), so the limit can't be exceeded. Move counting under same critical section where the channel is added. Although race conditions involving this appear unreachable, it's easier to see. Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this less brittle.

In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: Prevent double migration of device pages A device-private folio migrated to system memory by a CPU fault can remain reachable through the raw-PFN eviction path until migration finalization drops the source reference. If eviction selects the same device-private folio during this window, it can attempt to migrate the folio again. The second migration can leave an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to retry indefinitely and resulting in a soft lockup and RCU stall. Mark successfully migrated device-private folios using a low bit of their zone_device_data before migration finalization. Make both CPU-fault and raw-PFN migration paths skip device-private folios carrying this flag. Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve it when a device-private folio is split. Keeping the state on the physical folio also avoids depending on a virtual address that may change before a fault occurs. v2: - Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost) - Mark every base page covered by a migrated folio so retirement remains valid if the folio is later split. v3: - Store the migrated state in a low bit of zone_device_data instead of adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost) - Mask the flag when retrieving the ZDD and preserve it when splitting a folio. - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ v4: - Advance by the folio size only for migration entries marked with MIGRATE_PFN_COMPOUND. (Sashiko) v5: - Simplify ZDD flag updates and folio iteration. (Matthew Brost) - Skip retired device-private folios in the CPU-fault path. (Matthew Brost) - Preserve flag bits while taking a new ZDD reference for split folios. v6: - Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration entries are processed one at a time. (Sashiko) - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ The lockup was observed as: [10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557] [10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE [10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023 [10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe] [10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80 [10109.860655] Call Trace: [10109.860655] <TASK> [10109.860657] folio_lruvec_lock_irqsave+0x216/0x220 [10109.860661] ? __pfx_lru_add+0x10/0x10 [10109.860665] folio_batch_move_lru+0xc8/0x450 [10109.860670] ? lock_acquire+0xc4/0x2d0 [10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0 [10109.860677] ? folio_migrate_mapping+0xa6/0x110 [10109.860679] ? folio_migrate_flags+0x13b/0x1b0 [10109.860681] ? __pfx_lru_add+0x10/0x10 [10109.860683] __folio_batch_add_and_move+0xe7/0x2e0 [10109.860685] ? dma_iova_try_alloc+0xb0/0x140 [10109.860689] folio_add_lru+0x64/0x80 [10109.860691] __migrate_device_finalize+0x12c/0x270 [10109.860695] migrate_device_finalize+0x10/0x20 [10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper] [10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper] [10109.860709] xe_svm_bo_evict+0x15/0x20 [xe] [10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe] [10109.860921] xe_bo_move+0x107e/0x1570 [xe] [10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe] [10109.861059] ? __up_read+0x98/0x2b0 [10109.861061] ? lock_is_held_type+0xa3/0x130 [10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm] [10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm] [10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm] [10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm] [10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe] [10109.861198] ttm_bo_alloc_resource+0x219/0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: oa_tc6: Improve the error recovery When oversubscribed traffic causes lot of buffer overflow errors, probably due to loss of data chunks, driver fails to find a data chunk with end_valid bit set, before it runs out of sk buffer space. As a result, assert is seen during skb_put. Now, check is made if skb buffer has enough tailroom for the incoming data before accepting. If there is no room, current frame is abandoned and it will start looking for a data chunk with start_valid bit, that is a new frame. SK buffer allocation error is considered as recoverable error. rx_buf_overflow flag is too specific and no longer the only condition this flag is used for. Therefore it is renamed as wait_until_start_valid. This is more appropriate as this flag is used to look for the next data chunk with SV bit set, after failures like buffer overflow, buffer allocation failure, skb pointer validity besides buffer overflow error. Not writing to status0 if it reads 0.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted gen_new_kid() falls back to returning max (htid | 0xFFF) when both idr_alloc_u32() ranges are full, instead of reporting an error. u32_change() trusts that value and inserts a new knode with a handle that is already live in the hash table, breaking handle uniqueness within the table's node ID space. The handle was never reserved in ht->handle_idr, so every later error path that does idr_remove(&ht->handle_idr, handle) removes the reservation of a different, live knode, which is then reused — one failed add compounds into further duplicates. The 4095 limit is per (table, bucket) — ht->handle_idr is per hash table and the range is derived from htid (bucketid), so a table with divisor 256 can legitimately hold 256*4095 knodes. The sibling helper gen_new_htid() has the same silent in-band failure: it returns 0 when the tp_c handle pool (1..0x7FF) is full, and u32_init() publishes the root hash table with handle 0 without checking. Two root tables with handle 0 alias in u32_lookup_ht(), allowing cross-tcf_proto knode add/lookup/delete. Add the same exhaustion check that the divisor path already has. Return an error so u32_change() fails with ENOSPC/ENOMEM when the node ID space is exhausted, and so u32_init() fails with -ENOMEM when the hash table ID space is exhausted. The extack message distinguishes pool exhaustion (-ENOSPC) from a transient allocation failure (-ENOMEM). Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded) - Create a clsact qdisc on a device, then add 4095 u32 filters with auto-generated handles to fill the node ID space for the root hash table (single bucket). The 4096th auto-handle filter add triggers the duplicate handle (fh 800::fff reused). Reachable at Level 2 (unshare -Urn, namespace-local CAP_NET_ADMIN). - For gen_new_htid: create 2047 u32 proto entries on the same block to fill the tp_c handle pool, then create one more. The root table gets handle 0 and aliases with other handle-0 root tables.

In the Linux kernel, the following vulnerability has been resolved: igmp: convert struct ip_sf_list to RCU Commit 23d2b94043ca ("igmp: Add ip_mc_list lock in ip_check_mc_rcu") added spin_lock_bh(&im->lock) to ip_check_mc_rcu() to prevent a use-after-free while iterating im->sources during concurrent deletions. However, ip_check_mc_rcu() is called from RCU read-side critical sections in packet receive and route lookup fast paths (e.g. __mkroute_output(), ip_route_input_rcu(), and __udp4_lib_rcv()). When igmpv3_send_cr() or igmpv3_send_report() holds &pmc->lock and calls add_grec() -> igmpv3_newpack() -> ip_route_output_ports(), an XFRM policy matching a multicast destination triggers xfrm_tmpl_resolve_one() -> xfrm4_get_saddr() -> __mkroute_output() -> ip_check_mc_rcu(). This attempts to acquire &im->lock while &pmc->lock is already held on the same CPU, triggering a lockdep recursive locking warning / deadlock. Fix this by converting IPv4 struct ip_sf_list to RCU, mirroring the IPv6 implementation in net/ipv6/mcast.c: 1. Add struct rcu_head to struct ip_sf_list and annotate sf_next, sources, and tomb as __rcu pointers. 2. Use rcu_assign_pointer() and kfree_rcu() for list updates and deletions. 3. Remove spin_lock_bh(&im->lock) from ip_check_mc_rcu() and traverse im->sources locklessly with for_each_psf_rcu(), reading and writing counter fields with READ_ONCE() and WRITE_ONCE(). Note: RCU conversion of /proc/net/mcfilter will be done in a separate patch.

In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: fix RCU list diversion in ip6_mc_del1_src() When removing a source filter whose count reaches zero, ip6_mc_del1_src() unlinks psf from pmc->mca_sources. If the filter was previously active, the code moved psf directly into pmc->mca_tomb by updating psf->sf_next. Because pmc->mca_sources is traversed locklessly under RCU (e.g. by ipv6_chk_mcast_addr()), mutating psf->sf_next before a grace period elapses diverts concurrent readers to the tombstone list. Consequently, readers miss remaining active sources in pmc->mca_sources and improperly examine deleted tombstone entries. Fix this by allocating a new tombstone node for pmc->mca_tomb (as done in sf_setstate()) and retiring the original psf via kfree_rcu().

In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use copy-on-write RCU updates in ip6_mc_source() pmc->sflist is read locklessly under rcu_read_lock() by inet6_mc_check() during packet reception in the UDP and RAW multicast receive paths. ip6_mc_source() mutated psl->sl_addr and psl->sl_count in-place when adding or removing a source filter. Additionally, when expanding the filter buffer, newpsl was published via rcu_assign_pointer() before writing the new source into the array. Because 16-byte struct in6_addr writes are not atomic and array shifting is not synchronized with RCU readers, concurrent readers in inet6_mc_check() could read torn IPv6 addresses or observe duplicated/missed source entries. Fix this by switching ip6_mc_source() to copy-on-write RCU updates: allocate and fully populate newpsl before publishing it via rcu_assign_pointer(), and reclaim the old filter via kfree_rcu(), matching ip6_mc_msfilter(). Also remove the now unused IP6_SFBLOCK macro.

In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use rcu_assign_pointer() for __rcu list updates Several places in net/ipv6/mcast.c update RCU-protected lists (np->ipv6_mc_list, idev->mc_list, idev->mc_tomb) using direct pointer assignments instead of rcu_assign_pointer(): 1. In __ipv6_dev_mc_dec(), unlinking a group from idev->mc_list did: *map = ma->next; without rcu_assign_pointer() while concurrent readers traverse idev->mc_list locklessly under rcu_read_lock(). 2. In ipv6_sock_mc_drop() and __ipv6_sock_mc_close(), unlinking a group from np->ipv6_mc_list directly assigned *lnk = mc_lst->next and np->ipv6_mc_list = mc_lst->next without rcu_assign_pointer(), racing with lockless readers in inet6_mc_check(). 3. In __ipv6_sock_mc_join(), mc_lst->next was initialized to np->ipv6_mc_list via raw assignment before publishing mc_lst. 4. In mld_del_delrec() and __ipv6_dev_mc_inc(), __rcu source pointers passed into rcu_assign_pointer() lacked explicit dereference helpers. Fix these by consistently using rcu_assign_pointer() along with mc_dereference() / sock_dereference().

In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL deref in tipc_named_node_up() on empty publication list User-space applications can bind a large number of service addresses to one or more sockets. Each binding of a local-scope service address inserts one entry (publication) into the TIPC name table. If the number of these publications exceeds TIPC_MAX_PUBL (65535), protocol service types (such as node state and link state) are no longer inserted into the name table. This causes two issues: 1. User-space applications subscribing to node or link up/down events stop receiving notifications. 2. A NULL pointer dereference can occur: BUG: kernel NULL pointer dereference, address: 00000000000000d0 ... CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc4-default+ #5 PREEMPT(full) ... RIP: 0010:tipc_named_node_up (./include/linux/skbuff.h:2251 net/tipc/name_distr.c:195 net/tipc/name_distr.c:221) ... Call Trace: <IRQ> tipc_node_write_unlock (net/tipc/node.c:428) tipc_rcv (net/tipc/node.c:934 net/tipc/node.c:2189) tipc_udp_recv (net/tipc/udp_media.c:389) Thread 1 (tipc_net_finalize) | Thread 2 (named_distribute) -----------------------------|----------------------------- | ... | list_for_each_entry(publ, pls, binding_node) { | ... | __skb_queue_tail(list, skb); | ... | } | ... | hdr = buf_msg(skb_peek_tail(list)); ... | tipc_nametbl_publish(); | If 'tipc_nametbl_publish()' (Thread 1) fails because the number of local publications reaches TIPC_MAX_PUBL, list (Thread 2) will be empty. As a result, NULL is passed to 'buf_msg()', leading to a NULL pointer dereference. Fix these issues by allowing protocol service types (node state, link state, and topology server) to be inserted into the name table unconditionally. This ensures that users subscribing to these types always receive notifications. In addition, the maximum number of local user publications is reduced to (TIPC_MAX_PUBL - 1). This ensures that the maximum bulk size calculated in tipc_link_set_queue_limits() remains valid.

In the Linux kernel, the following vulnerability has been resolved: tipc: Dont send random pad bytes in RESET/ACTIVATE messages The interface name is passed in a fixed length (TIPC_MAX_IF_NAME) buffer. Replace the strcpy(data, l->if_name) with memcpy() so that the pad bytes are actually written (l->if_name[] is zero padded) rather than sending random bytes from the skb to the remote system. Replace two other strcpy() with strscpy().

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: restore network header before routing and forwarding ipv6_srh_rcv() runs with skb->data at the Segment Routing Header (SRH) while skb_network_header() points at the IPv6 header. When segments_left > 0, ipv6_srh_rcv() previously restored the skb->data position by pushing sizeof(struct ipv6hdr), assuming the SRH immediately followed the fixed IPv6 header. If another extension header (such as a Hop-by-Hop options header) precedes the SRH, skb_network_offset() remained negative. This led to two problems: 1. During ip6_route_input(), fib6_rules_early_flow_dissect() invokes __skb_flow_dissect() which passes the negative skb_network_offset() to flow dissection, breaking BPF and C flow dissector logic. 2. If forwarded via ip6_forward() or redirected via act_mirred, downstream handlers (like sch_fragment() or neighbour output) pass the negative offset as an unsigned length, triggering OOB memcpy or buffer overflows. Fix this by pushing -skb_network_offset(skb) before routing, ensuring skb_network_offset(skb) is 0 for route lookup / flow dissection as well as downstream forwarding. On the loopback path, pull skb_transport_offset(skb) to restore skb->data to the SRH before looping back.

In the Linux kernel, the following vulnerability has been resolved: af_packet: Don't cast tpacket_hdr.tp_len to int in tpacket_parse_header(). syzbot reported BUG() in sock_sendmsg_nosec(). [0] The problem is that tpacket_parse_header() casts user-provided tpacket_hdr.tp_len, which is u32, to int. If the length is larger than INT_MAX, the following condition in tpacket_parse_header() passes, if (unlikely(tp_len > size_max)) and any negative value can be returned to the caller, up to sock_sendmsg_nosec(). The repro set tpacket_hdr.tp_len to 0xfffffdef, which is cast to -EIOCBQUEUED (-529), triggering BUG() in sock_sendmsg_nosec(). *(uint64_t*)0x200000000008 = 0xfffffdef; ... syscall(__NR_write, /*fd=*/r[0], /*buf=*/0x200000000000ul, /*count=*/1ul); Let's define the local tp_len as u32 in tpacket_parse_header(). [0]: kernel BUG at net/socket.c:803! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 5628 Comm: syz-executor176 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026 RIP: 0010:sock_sendmsg_nosec+0x145/0x180 net/socket.c:803 Code: 06 67 48 0f b9 3a eb 95 e8 e8 3a 22 f8 48 89 df 4c 89 f6 4c 89 e2 4d 89 fb 2e e8 32 a5 5c 16 e9 51 ff ff ff e8 cc 3a 22 f8 90 <0f> 0b e8 c4 3a 22 f8 48 83 c3 18 48 89 d8 48 c1 e8 03 42 80 3c 28 RSP: 0018:ffffc90003aefb48 EFLAGS: 00010293 RAX: ffffffff89a578d4 RBX: ffff8880764c67c0 RCX: ffff88807fb23e80 RDX: 0000000000000000 RSI: 00000000fffffdef RDI: 00000000fffffdef RBP: 00000000fffffdef R08: ffffc90003aef747 R09: 1ffff9200075dee8 R10: dffffc0000000000 R11: fffff5200075dee9 R12: 0000000000000001 R13: dffffc0000000000 R14: ffffc90003aefbc0 R15: ffffffff8aac4310 FS: 000055559101b400(0000) GS:ffff888124ce0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000000210 CR3: 0000000073dca000 CR4: 00000000003526f0 Call Trace: <TASK> __sock_sendmsg net/socket.c:815 [inline] sock_write_iter+0x2de/0x3e0 net/socket.c:1266 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x612/0xba0 fs/read_write.c:687 ksys_write+0x150/0x270 fs/read_write.c:739 do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline] do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f173130ecb9 Code: c0 79 93 eb d5 48 8d 7c 1d 00 eb 99 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 d8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd67e44248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f173130ecb9 RDX: 0000000000000001 RSI: 0000200000000000 RDI: 0000000000000003 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd67e44388 R13: 0000000000000002 R14: 00002000000000c0 R15: 0000000000000002 </TASK>

In the Linux kernel, the following vulnerability has been resolved: staging: fbtft: make dirty_lock IRQ-safe fbtft_mkdirty() can be reached from the fbcon rendering path while processing printk() in hardirq context. Meanwhile, dirty_lock is also taken by fbtft_deferred_io() in workqueue context with local interrupts enabled. Lockdep reports a possible IRQ lock inversion involving dirty_lock and console_owner. A hardirq can interrupt a CPU holding dirty_lock and enter the console rendering path, which can attempt to acquire dirty_lock again. The following lockdep report was observed on an RK3566 system with CONFIG_PROVE_LOCKING enabled: WARNING: possible irq lock inversion dependency detected swapper/2/0 just changed the state of lock: (console_owner){-...}-{0:0} but this lock took another, HARDIRQ-unsafe lock in the past: (&par->dirty_lock){+.+.}-{2:2} CPU0 CPU1 ---- ---- lock(&par->dirty_lock); local_irq_disable(); lock(console_owner); lock(&par->dirty_lock); <Interrupt> lock(console_owner); *** DEADLOCK *** Use spin_lock_irqsave() for fbtft_mkdirty() and spin_lock_irq() for fbtft_deferred_io(). They only access the dirty line range, so the IRQ-off regions remain short.

In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_micfil: balance mclk enable/disable hw_params() enables mclk unconditionally and hw_free() disables it unconditionally, but the PCM core does not guarantee 1:1 pairing: hw_free() can run without hw_params(), and hw_params() can be called multiple times from the SETUP state. This triggers an "already disabled" WARN() in the first case and leaks an enable reference in the second, leaving the clock ungateable. Guard both sides with the existing mclk_flag, as fsl_sai.c does with mclk_streams.

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close() acp6x_pdm_dma_close() does not free the runtime->private_data buffer allocated in acp6x_pdm_dma_open(). Add the missing kfree.

In the Linux kernel, the following vulnerability has been resolved: btrfs: detach failed sprout device from transaction update list When creating the first metadata chunk for a sprout filesystem, create_chunk() adds the new device to the transaction dev_update_list through device->post_commit_list. If the subsequent system chunk creation fails, btrfs_init_new_device() aborts the transaction and releases the device while post_commit_list is still linked. This triggers a warning in btrfs_free_device() and leaves the transaction list referencing freed memory. Detach the device while holding chunk_mutex before releasing it.

In the Linux kernel, the following vulnerability has been resolved: btrfs: restore active device pointers after failed sprout btrfs_init_new_device() switches latest_dev and possibly s_bdev from the seed device to the new sprout device before creating the first writable chunks. If chunk creation or the subsequent sprout setup fails, the error path releases the new device without switching those pointers back. btrfs_show_devname() can then dereference the freed latest_dev and crash. Restore the active device pointers to the latest seed device before removing and releasing the failed sprout device.

In the Linux kernel, the following vulnerability has been resolved: bonding: alb: fix uninitialized transport header access in alb_determine_nd() alb_determine_nd() uses icmp6_hdr(skb) to inspect ICMPv6 headers. However, in xmit paths (e.g. packets sent via AF_PACKET / raw sockets or forwarded packets), skb->transport_header is not guaranteed to be initialized. While pskb_network_may_pull() ensures the packet data is linear starting from the network header, it does not set or adjust the transport header offset. Dereferencing icmp6_hdr(skb) can therefore access out-of-bounds memory. Fetch the icmp6hdr directly after ipv6hdr following pskb_network_may_pull(), and reload ipv6hdr in case pskb_may_pull() reallocated skb->head. Also remove the unused bond argument from alb_determine_nd().